Enerpac PL-Series Bedienungsanleitung PDF herunterladen (Seite 3)

MOUNTING SPECIFICATIONS

Mounting Threaded Body Cylinders

Threaded body cylinders can be threaded into a tapped hole, secured to the fixture using

a mounting flange, threaded into the fixture and secured with a jam nut, or mounted

through a clearance hole and secured with jam nuts. See illustrations below.

When a threaded body pull cylinder is being installed in a fixture, the thread engagement

should be no less than the thread engagement for the standard Enerpac mounting flange.

If a cylinder is being mounted using just the lower portion of the threads, the engagement

should be increased for additional support. See table below for minimum thread

engagement.

Cylinder Capacity Minimum Thread Engagement

2,2 kN 500 lb 13 mm .50"

5,6 kN 1250 lb 13 mm .50"

9 kN 2000 lb 16 mm .63"

35 kN 7900 lb 30 mm 1.25"

oil connection

jam nut

threaded into fixture

mounting flange

oil connection

jam nuts

Figure 1

1 2 3 4 5 6 7 8 ... 31 32

Keine Kommentare

Enerpac PL-Series Bedienungsanleitung Seite 3